Application of Hot Air Stenter Machine: hot air tenter is used for heat setting of warp knitting, weft knitting and chemical fiber fabrics, and also for heat setting of various fabrics such as coating, wool, cotton and polyester. Car type: left-handed, right-handed (customer-defined). Working width: 800-3200 (customer-defined). Heat source: oil heating, main baking with oil heating furnace 400,000 kcal / hour. Air blowing situation: small circulation The mesh staggered strong jet wind speed is 10m / s. Planned speed: 0 ~ 80m / min. Overall weight: 40 tons. Temperature: 100 ~ 180 degrees

Uses: This machine can be used for various kinds of carpet non-woven fabrics, artificial leather and other reverse coating treatment. The basic principle is that the use of natural latex, butyl rubber foaming, and then the configuration of the punishment to reach the back of the carpet has a non-slip and elegant result. Models: 2000 and 4000, if there are special process requirements, non-standard production lines can be planned according to customer plans.

The working principle of the hot air tenter machine sends the unshaped fabrics into the dull board from the flat stripper of the edge stripper. The dull board automatically hooks the two ends of the cloth board to the needle board. Electric heating, fan blowing, and constant temperature ovens with successively different temperature sections, after entering the end, after cooling to remove static electricity, the swing falls into the cloth car, and a clean and elegant cloth is obtained.