Overview Of PP Adhesive

PP adhesive, also known as solid glue and also called stick glue, is often used to adhere to the paper.

PP adhesive is an ideal and beautiful adhesive, it is a hot liquid injected into the mold, cooled, and turned into a solid, loaded into a lipstick-type tube, forming a solid adhesive, appearing like a large lipstick and a short thick stick.

Production Process Of PP Adhesive

PP adhesive is a short, flat, fast project, with easy-to-grasp technology, high value-added, low investment, quick results, the use of health, and easy-to-carry characteristics. Generally, the receiver is a school-run factory or individual enterprise. In order to further reduce the investment, the producer can design a simple melon kettle by himself. The melon kettle consists of two layers inside and outside the drum, the sandwich layer is filled with water, directly put on the stove to heat up, and the temperature to be able to dissolve bone gum, PVA - 99, etc. can be. The inner barrel is generally 30cm in diameter and 40--50cm in height; the outer barrel is 40cm in diameter and 40--50cm in height. 2--3 taps at the bottom of the inner barrel lead to the outer barrel, which can be filled directly with taps when filling. When operating, the above-mentioned raw materials are mixed into the reaction kettle, heated and melted, and mixed and cooled by filling. The container can be large or small, generally use the lipstick size container can be used, can contact with the blow molding factory processing.

Features Of PP Adhesive

(1) Easy to carry and use, screw the base body when using, after the glue stick is slightly exposed, apply it.

(2) Does not pollute the area outside the bonding surface, and thin paper will not be soaked through.

(3) Strong adhesion, and can maintain long-term adhesion. Simple production, easy to purchase raw materials, low cost.

PP Adhesive