Introduce the debugging method of automatic liquid nitrogen bead dispensing

How should automatic liquid nitrogen bead dispensing be applied and commissioned in the actual process of using automatic liquid nitrogen bead dispensing? The next is the excellent manufacturer of automatic liquid nitrogen bead dispensing Guangzhou Ascend Precision Machinery Co. nitrogen bead dispensing and Automatic liquid nitrogen bead dispensing setting of the glue time period and Setting of working pressure for automatic liquid nitrogen bead dispensing. The next step is to explain the detailed operation procedure.

Selection of needles for automatic liquid nitrogen bead dispensing

Automatic liquid nitrogen bead dispensing needle internal diameter should be selected and the diameter of the glue point 1/2. in the automatic dispensing machine work, according to the size of the product to choose the appropriate needle, different sizes of the product to use the appropriate needle.

Automatic liquid nitrogen bead dispensing less dispensing amount than the standard amount of 0.005ml, stainless steel needle small inner diameter is 0.1mm, needle small inner diameter 0.1mm. special attention: automatic liquid nitrogen bead dispensing needle to The relative height of the PCB board and the inner diameter of the needle are key parameters, so they should be taken into consideration when selecting the needle.

Automatic liquid nitrogen bead dispensing setting of the glue time period

The setting of the glue volume should be 1/2 of the product interval to ensure sufficient glue volume to stick to the part and prevent excessive glue leakage. automatic liquid nitrogen bead dispensing can also be controlled according to the glue time period of the dispensing machine, and the actual manufacturing can control the glue volume and glue time according to the real situation.

The setting of working pressure for automatic liquid nitrogen bead dispensing

The amount of automatic liquid nitrogen bead dispensing is provided to the glue tube and the needle by the intelligent controller. The amount of automatic liquid nitrogen bead dispensing pressure depends on the amount of glue dispensed and the dispensing rate. If the pressure is too strong, the glue will be sprayed out easily, which will affect the appearance of the product.

From this excellent manufacturer of automatic liquid nitrogen bead dispensing Guangzhou Ascend Precision Machinery Co. for selection of needles for automatic liquid nitrogen bead dispensing, automatic liquid nitrogen bead dispensing setting of the glue time period and setting of working pressure for automatic liquid nitrogen bead dispensing three Aspects introduce the debugging method of automatic liquid nitrogen bead dispensing, I think everyone understands how to debug automatic liquid nitrogen bead dispensing.