Are you looking to upgrade your AR 15 lower parts kit? Installing an AR 15 lower parts kit can seem intimidating at first, but it's actually quite simple. In this blog post, we will walk you through everything you need to know about installing an AR 15 lower parts kit, from the tools you'll need to the steps to take when putting it together. By the end of this post, you will have the knowledge and confidence to install your own AR 15 lower parts kit.

The basics of the AR-15 lower parts kit

For the uninitiated, an AR 15 lower parts kit is a comprehensive collection of essential components that are used to assemble a lower receiver for an AR-15 rifle. The lower parts kit contains all of the necessary parts to build the lower receiver, including the trigger and hammer assemblies, bolt catch, magazine release, safety selector switch, and more. An 80-lower.com AR 15 lower parts kit is a great way to get everything you need to get started with building your own AR-15 rifle.

An 80-lower.com AR 15 lower parts kit includes all of the essential parts and components needed to construct an AR-15 lower receiver. The kit contains components such as the trigger and hammer assemblies, bolt catch, magazine release, safety selector switch, front pivot pin, takedown pin, buffer retainer pin, trigger guard assembly, and more. Additionally, it includes all the necessary small parts such as pins, detents, and springs. All of these components are pre-assembled and are ready to install in your lower receiver. With an 80-lower.com AR 15 lower parts kit, you can be sure that you have all of the components you need to start building your rifle.

Why you should install a lower parts kit

Installing an AR-15 lower parts kit is a great way to customize your rifle and improve its performance. Lower parts kits contain all of the components needed to assemble the lower receiver of your AR-15, which houses the trigger group and other components essential for the gun’s functioning. Installing a lower parts kit can help ensure that your rifle runs smoothly, with better trigger response, smoother operation, and increased accuracy. Plus, it’s a great way to personalize your rifle and make it your own.

If you’re looking for an easy and reliable way to upgrade your AR-15, then a lower parts kit is definitely worth considering. With a quality lower parts kit, you can easily replace worn out or damaged parts, as well as add accessories like grips, stocks, and more. And since lower parts kits are relatively inexpensive, it won’t break the bank either.

In addition to improved performance and personalization options, installing a lower parts kit is also a great way to learn more about your firearm. Understanding how the different components of your AR-15 fit together can help you identify problems before they occur, allowing you to maintain your rifle more effectively.

So if you’re looking for an easy and reliable way to upgrade your AR-15, then investing in an AR-15 lower parts kit is definitely a smart choice. Not only will it improve your rifle’s performance and reliability, but it will also give you the opportunity to customize it according to your preferences.

What you need to know before you start

Before you begin your AR-15 lower parts kit installation, it’s important to be aware of the specific parts included in the kit. The kit should include a trigger guard, bolt catch, magazine release button, trigger, disconnector, hammer, pistol grip and selector.

You’ll also need to make sure you have the right tools for the job, as well as some other supplies, such as lubricant and cleaning products. A few items you may need include: a hammer, needle-nose pliers, punches, screwdrivers and Allen wrenches.

Finally, it’s important to be sure that the AR-15 lower parts kit you’re using is compatible with your rifle’s model. It’s also important to read the instructions carefully and follow them to the letter. This will ensure that your installation goes smoothly and without incident.

The step-by-step guide to installing your lower parts kit

The AR-15 lower parts kit is a great way to upgrade or customize your AR-15 rifle. Installing the lower parts kit can be a daunting task, but with the right tools and a bit of patience, you can do it yourself! Here's a step-by-step guide to make sure your installation is successful.

1. Start by laying out all the parts from your lower parts kit. Make sure you have everything you need, including the trigger guard, safety selector, magazine release, bolt catch, buffer tube, and takedown pins.

2. Remove the pistol grip by unscrewing the retaining screw and pulling out the grip.

3. Install the trigger guard by pressing it into place on the bottom of the lower receiver and securing it with the included roll pin.

4. Next, install the safety selector by sliding it onto the left side of the lower receiver and pushing it in until it is flush with the receiver.

5. Install the magazine release by inserting it into place on the right side of the lower receiver and securing it with its included screw.

6. Install the bolt catch by sliding it into place on the left side of the lower receiver and securing it with its included roll pin.

7. Attach the buffer tube to the rear of the lower receiver using its included castle nut and end plate. Once attached, secure the buffer tube by tightening the castle nut with a castle nut wrench.

8. Finally, install the takedown pins by pushing them into place on either side of the upper receiver.

Once all of these steps are completed, your AR-15 lower parts kit installation is complete! You can now customize and enjoy your upgraded rifle!

Tips and tricks for a successful installation

When it comes to installing your AR 15 lower parts kit, there are some important tips and tricks to follow for a successful installation. Here are some of the most essential pieces of advice for a successful installation:

1. Read the instructions and understand each step before beginning – Before you start the installation, make sure you read the instructions carefully and understand each step. It’s important to have a clear understanding of what needs to be done so that you don’t miss any important steps.

2. Make sure all the pieces are present – Make sure you have all the necessary pieces present before beginning the installation. Double-check the list to make sure you haven’t missed anything.

3. Clean the parts thoroughly – Before installation, it’s essential to clean all the components of the AR 15 lower parts kit. This will ensure that all the parts fit together securely and also help to reduce friction and wear during operation.

4. Use quality tools – A quality tool set is essential for a successful installation. Using the wrong tool for a task can cause damage or create a poor fit, resulting in unreliable operation of your AR 15 lower parts kit.

5. Take your time – Installing an AR 15 lower parts kit requires patience and attention to detail. Don’t rush through the process as this could result in an improper installation that may lead to serious damage or malfunction.

Following these tips and tricks will help ensure a successful installation of your AR 15 lower parts kit. Always use caution and good judgement when working on firearms and make sure you take your time to get it right!